Differences

This shows you the differences between two versions of the page.

--- cs401r_w2016:lab8 [2016/02/26 15:45]
admin
+++ cs401r_w2016:lab8 [2021/06/30 23:42] (current)
@@ Line 10: / Line 10: @@
 ----
 ====Deliverable:====
+For this lab, you will implement a particle filter for robot localization.  Your notebook should print a visualization of the true location of the robot, your estimate of its position, and a simple scatterplot of the distribution of particles at the end of tracking.  For example, my visualization looks like the following:
+{{ :cs401r_w2016:final.png?direct|}}
+To successfully complete the lab, you will have to:
+  - Create an initial set of particles
+  - Create a proposal distribution
+  - Create an observation likelihood distribution
+  - Given a set of particles, compute the expected value of the x,y position of the robot
+  - Resample the particles to avoid weight degenercy
 ----
 ====Grading standards:====
+Your notebook will be graded on the following elements:
+  * 25% Implemented a correct sensor likelihood
+  * 25% Implemented a reasonable proposal distribution
+  * 30% Implemented particle resampling correctly
+  * 10% Correctly compute expected value of state x,y coordinates
+  * 10% Final plot is tidy and legible
 ----
 ====Description:====
-For this lab, you will need the following files:
+For this lab, you will implement the basic particle filter found in Algorithm 23.1 of the book (pg. 826).  You can assume that your particle proposal distribution is equal to the dynamics prior (see Section 23.5.4), which leads to a very simple form of particle filtering.  Specifically, you may assume that the "dynamics" are that the moves in a random direction and changes angles randomly.  I used $p(z_{t+1}|z_{t}) = \mathcal{N}(z_{t},\Sigma)$, where $\Sigma$ is a parameter you will need to tune.
-[[http://hatch.cs.byu.edu/courses/stat_ml/sensors.mat|sensors.mat]] contains the data you will use (you can also regenerate it directly, using the script below).
+You will need the following files:
-[[http://hatch.cs.byu.edu/courses/stat_ml/lab8_common.py|lab8_common.py]] contains utility functions that will enable you to create a simple map, and compute what a robot would see from a given position and angle.
+[[https://www.dropbox.com/s/8ysftyto1u8xgsq/sensors.mat?dl=0|sensors.mat]] contains the data you will use (you can also regenerate it directly, using the script below).  The data is in the ''sonars'' field, and the true states are in the ''true_states'' field.  ''true_states'' is a 3xT matrix, where each 3x1 column represents the true x,y and angle (\in 0,2*pi) of the robot at time t.
-[[http://hatch.cs.byu.edu/courses/stat_ml/lab8_gen_sonars.py|lab8_gen_sonars.py]] is the script that I used to generate the data for this lab.  If you run it, it will generate a new dataset, but it will also produce a nice visualization of the robot as it moves around, along with what the sensors measure.
+[[https://www.dropbox.com/s/zcl5mr1ltt5h6u7/lab8_common.py?dl=0|lab8_common.py]] contains utility functions that will enable you to create a simple map, and compute what a robot would see from a given position and angle.
+[[https://www.dropbox.com/s/id5arz2c5gskobc/lab8_gen_sonars.py?dl=0|lab8_gen_sonars.py]] is the script that I used to generate the data for this lab.  If you run it, it will generate a new dataset, but it will also produce a nice visualization of the robot as it moves around, along with what the sensors measure.
+To get started, check out the provided functions in lab8_common.py.  There are two critical functions:
+  - ''create_map'' will create a map object and return it
+  - ''cast_rays'' will simulate what a robot would see from a specific x,y,theta position, given a map
+''cast_rays'' is fully vectorized, meaning that you can simulate from multiple locations simultaneously.  For example, in my code, I only call ''cast_rays'' once:
+<code python>
+    part_sensor_data = cast_rays( parts, room_map )
+    liks = ray_lik( data[:,t:t+1], part_sensor_data.T ).T
+</code>
+where I have represented my particles as a 3xN matrix.  In the above example call, ''part_sensor_data'' is an Nx11 matrix.  ''ray_lik'' is my implementation of the likelihood function $p(y_t|z_t)$, and is also fully vectorized.  It returns an Nx1 matrix, with the likelihood of each particle.
+Your proposal distribution can be anything you want.  Be creative.  You may have to experiment!
+You should experiment with two different likelihoods.  First, try using a simple Gaussian likelihood.  You will need to tune the variance, but don't spend too long on it; I never got this to work very well.  Second, try using a simple Laplacian distribution.  (The Laplacian is like a Gaussian, except that instead of squaring the difference, one uses an absolute value): $$p(y_t|z_t^s) = \exp \left( -\dfrac{1}{\sigma} \sum_i \lvert (y_t)_i - \mathrm{cast\_rays}(z_t^s)_i \rvert \right)$$, where $\sigma$ is a parameter that you will need to tune.
+You will have to experiment with the parameters of these distributions to make them work.  Try values between 0.01 and 1.
 ----
 ====Hints:====
+You may find the ''numpy.random.mtrand.multinomial'', or ''numpy.random.choice'' functions helpful.
 It can be frustrating to experiment with a particle filter when the interface is too slow.  By using ''pyqtgraph'' instead of ''matplotlib'', you can speed things up considerably.
@@ Line 34: / Line 77: @@
 <code python>
-    from pyqtgraph.Qt import QtGui, QtCore
+from pyqtgraph.Qt import QtGui, QtCore
-    import pyqtgraph as pg
+import pyqtgraph as pg
-    app = QtGui.QApplication( [] )
+app = QtGui.QApplication( [] )
-    win = pg.GraphicsWindow( title="Particle filter" )
+win = pg.GraphicsWindow( title="Particle filter" )
-    win.resize( 600, 600 )
+win.resize( 600, 600 )
-    win.setWindowTitle( 'Particle filter' )
+win.setWindowTitle( 'Particle filter' )
-    pg.setConfigOptions( antialias=True )
+pg.setConfigOptions( antialias=True )
-    p3 = win.addPlot( title="Room map" )
+p3 = win.addPlot( title="Room map" )
-    for i in range( 0, room_map.shape[0] ):
+for i in range( 0, room_map.shape[0] ):
-        p3.plot( [room_map[i,0], room_map[i,2]], [room_map[i,1], room_map[i,3]] )
+    p3.plot( [room_map[i,0], room_map[i,2]], [room_map[i,1], room_map[i,3]] )
-    p3.setXRange( -0.1, 1.1 )
+p3.setXRange( -0.1, 1.1 )
-    p3.setYRange( -0.1, 1.1 )
+p3.setYRange( -0.1, 1.1 )
 </code>
@@ Line 56: / Line 99: @@
 <code python>
-        if ts_plot == None:
+if ts_plot == None:
-            ts_plot = p3.plot( true_states[0,0:t+1], true_states[1,0:t+1], pen=(0,0,255) )
+    ts_plot = p3.plot( true_states[0,0:t+1], true_states[1,0:t+1], pen=(0,0,255) )
-            ex_plot = p3.plot( exs[0,0:t+1], exs[1,0:t+1], pen=(0,255,0) )
+    ex_plot = p3.plot( exs[0,0:t+1], exs[1,0:t+1], pen=(0,255,0) )
-            pts = p3.scatterPlot( parts[0,:], parts[1,:], symbol='o', size=1, pen=(255,100,100) )
+    pts = p3.scatterPlot( parts[0,:], parts[1,:], symbol='o', size=1, pen=(255,100,100) )
-        else:
+else:
-            ts_plot.setData( true_states[0,0:t+1], true_states[1,0:t+1] )
+    ts_plot.setData( true_states[0,0:t+1], true_states[1,0:t+1] )
-            ex_plot.setData( exs[0,0:t+1], exs[1,0:t+1] )
+    ex_plot.setData( exs[0,0:t+1], exs[1,0:t+1] )
-            pts.setData( parts[0,:], parts[1,:] )
+    pts.setData( parts[0,:], parts[1,:] )
+pg.QtGui.QApplication.processEvents()
 </code>
+(you must call ''processEvents'' to actually update the display)
+The combination of these two things allowed me to experiment with my particle filter in real-time.  Note that you are not required to produce any sort of visualization over time, just a single plot at the end of running your code.  The use of ''pyqtgraph'' is strictly for the work you will do debugging your particle filter.
+Or if you want to use matplotLib which is better for Jupyter Notebook but slower, here is some code for plotting at each iteration:
+<code python>
+import matplotlib.pyplot
+import numpy
+from IPython.display import clear_output
+def draw(particles, true_values, predicted_values, t):
+    clear_output(wait=True)
+    show_map( room_map )
+    plt.scatter(particles[0,:] , particles[1,:], c="yellow")
+    plt.plot(true_values[0,:t+1],  true_values[1,:t+1] , c= "green", label="Actual Position")
+    plt.plot(predicted_values[0,:t+1], predicted_values[1,:t+1], c= "red", label="Estimated Position")
+    plt.legend(loc=1)
+    plt.show()
+</code>

BYU CS classes

User Tools

Site Tools

Differences

Page Tools